Coleman Evcon Control Boards

Due to the nature of the products we sell directly to homeowners we must have you read and understand our terms of use page. If for any reason you can't understand or agree to these terms we suggest you call a reputable Heating and Air Conditioning Contractor in your area for assistance. Your safety and the manufacturers warranty also requires it. Please click this link.
Terms of Use and Privacy Policy

Thanks for shopping with us!

SEARCH OUR SITE

COLEMAN EVCON BLEND AIRE II SYSTEM

This system is usually found in Manufactured Homes ( Mobile Homes or Modular Homes ).

It usually consists of a Central Gas Furnace in the living area and a "Combustion Air Blower Assembly" which brings fresh air into the furnace from a special flue pipe which goes through the roof of the home. There is a combustion blower assembly on the roof and within the vent pipe you will find a circuit board ( or control board ) called the "Upper Control Board". Before ordering either the upper or lower control boards from our site please confirm which board you actually need. This may require the services of an H.V.A.C. Company in your area if you aren't sure of your qualifications to do this troubleshooting.

Directly below you will find the "Upper Control Board". If you need the lower control board, please scroll lower on this page.

DELUXE BLEND AIRE II UPPER CONTROL BOARD # 7681-318P
(THIS BOARD IS FOUND IN THE VENTILATION PIPE ON THE ROOF
THAT HOUSES THE ATTIC VENTILATION FAN ASSEMBLY)
ORIGINAL BOARD MANUFACTURER A1 COMPONENTS # F7572
USED WITH MODELS: 7681-8171/B, 76818171, 7681-8171/A, 7681-8171/B

This photo is of the old style upper control board. This board has been discontinued by Coleman. Please see the photo below of the new control board kit that you will receive and important information you will need to install it.

Click image to enlarge, use browser back button to return

The photo above is of the new upper control board you will receive when you order our order number L44-610 but there will also be a wiring harness included with butt connectors (not shown in the photo). The new board is much smaller than the old board and the 4 pin connector has been changed. In order to use this new board in old Coleman Blend Air II furnaces, you will need to install the supplied harness on the 4 pins on the new board, cut your old modular connector off and using the butt connectors, install the wires to the new wiring harness. The color code should be the same as your old wires. If you have a newer Blend Air II, you may not need the new harness as the system may already have the correct modular plug. Additionally usually the old boards had a spot for (2) blue wires that control an operating light which is NOT present on the new board, so just disregard the blue wires on the new board installation.

OUR ORDER # L44-610
Price:
To see YOUR PRICE, please click the Add To Cart button.
This does not obligate you to purchase the product.
To return to this page, please use your back button or hit the
CONTINUE SHOPPING button on the lower part of the Shopping Cart Page.

COLEMAN EVCON RESIDENTIAL FURNACE CONTROL BOARD

Note: There has been changes to this board on many of the Coleman Furnaces. This kit may require the services of an HVAC Company to install depending on your qualifications.

As you can see, some furnaces will need the wiring harness changed with the supplied harnesses and instructions. The board you have MAY not look like the one below and that is why you may need to change these wires! You may not need all the wires supplied, follow the instructions that come with the kit!

Click image to enlarge, use browser back button to return

YORK CONTROL BOARD # #331-01972-200, 473-23151-000, 431-01972-100
ORIGINAL BOARD MANUFACTURER TEXAS INST # 231F-2
USED WITH MODELS: BGD, BGM, BGU, GMB, GUB &; UGA, (ALL)
ALSO USED TO REPLACE COLEMAN EVCON MODEL DGAT WITH TEXAS INST. BOARD # 2702-310 and A FG-8 IF BUILT PRIOR TO 10-01-99 (WLHM) Check your Serial number - if it starts with a number below 99 - this is the board you need.

OUR ORDER #L38-808

Price:
To see YOUR PRICE, please click the Add To Cart button.
This does not obligate you to purchase the product.
To return to this page, please use your back button or hit the
CONTINUE SHOPPING button on the lower part of the Shopping Cart Page.

PLEASE NOTE: U.P.S. DOES NOT OPERATE ON THE WEEKEND, SO IF YOU ORDER A NEXT DAY AIR PART ON FRIDAY, YOU WILL NOT GET IT ON THE WEEKEND! WE CAN'T BE RESPONSIBLE FOR THE U.P.S. DELIVERY SCHEDULES. IF YOU NEED A PART FOR THE WEEKEND, PLEASE ORDER BY THURSDAY BEFORE NOON MOUNTAIN TIME. ALSO ANY NON STOCKED ITEM THAT MUST COME FROM A FACTORY MAY NOT BE ABLE TO BE SHIPPED BY ANY MEANS OTHER THAN U.P.S GROUND, DEPENDING ON THE FACTORY IT HAS TO COME FROM! IF THIS OCCURS ALL WE CAN DO IS REFUND SHIPPING CHARGES BETWEEN WHAT YOU ORDERED AND GROUND AS WE HAVE ABSOLUTELY NO CONTROL OVER THIS!

COLEMAN EVCON MOBILE HOME LOWER CONTROL BOARD # 7681-317P
(THIS BOARD IS FOUND AT THE FURNACE CONTROL BOX)
ORIGINAL BOARD MANUFACTURER A-1 COMPONENTS # F7454
USED WITH MODEL 7681

This board uses pin connectors (notice white plug on top left of photo. If your doesn't have this connector you need the board further down on this page. Check the Evcon part numbers on your existing board!)

Click image to enlarge, use browser back button to return

OUR ORDER # RCKSLS 7681-317P

Price:
To see YOUR PRICE, please click the Add To Cart button.
This does not obligate you to purchase the product.
To return to this page, please use your back button or hit the
CONTINUE SHOPPING button on the lower part of the Shopping Cart Page.

PLEASE NOTE: U.P.S. DOES NOT OPERATE ON THE WEEKEND, SO IF YOU ORDER A NEXT DAY AIR PART ON FRIDAY, YOU WILL NOT GET IT ON THE WEEKEND! WE CAN'T BE RESPONSIBLE FOR THE U.P.S. DELIVERY SCHEDULES. IF YOU NEED A PART FOR THE WEEKEND, PLEASE ORDER BY THURSDAY BEFORE NOON MOUNTAIN TIME. ALSO ANY NON STOCKED ITEM THAT MUST COME FROM A FACTORY MAY NOT BE ABLE TO BE SHIPPED BY ANY MEANS OTHER THAN U.P.S GROUND, DEPENDING ON THE FACTORY IT HAS TO COME FROM! IF THIS OCCURS ALL WE CAN DO IS REFUND SHIPPING CHARGES BETWEEN WHAT YOU ORDERED AND GROUND AS WE HAVE ABSOLUTELY NO CONTROL OVER THIS!

COLEMAN EVCON MOBILE HOME LOWER CONTROL BOARD # 7681-309-1A
(THIS BOARD IS FOUND AT THE FURNACE CONTROL BOX)

NOTE: 9-28-9 COLEMAN HAS DIS CONTINUED THIS CONTROL BOARD AND DIRECTS US TO HAVE OUR CLIENTS TO THE CONTROL BOARD LISTED ABOVE (7681-317P)

THE DESCRIPTION BELOW IS ONLY FOR YOUR COMPARISONS BUT THIS BOARD IS NO LONGER AVAILABLE - USE 7681-317P

NOTE: THIS BOARD IS SIMILAR TO BUT NOT THE SAME AS THE BOARD LISTED ABOVE! PLEASE NOTE THIS BOARD HAS NO 4 TERMINAL WHITE PLASTIC CONNECTOR ON IT AS THE ONE ABOVE. IT ALSO HAS (2) BLACK SWITCHES ON THE BACK SIDE OF THE BOARD. PLEASE BE SURE TO READ THE PART NUMBER ON YOUR EXISTING BOARD AND STUDY THE PHOTOS TO BE SURE YOU ARE ORDERING THE RIGHT BOARD AS COLEMAN USES MOSTLY THE ONE IN THE TOP PHOTO BUT THERE ARE ALSO MANY OF THE ONES BELOW BEING USED!

Click image to enlarge, use browser back button to return

OUR ORDER: RCKMTSL 7681-317P

Price:
To see YOUR PRICE, please click the Add To Cart button.
This does not obligate you to purchase the product.
To return to this page, please use your back button or hit the
CONTINUE SHOPPING button on the lower part of the Shopping Cart Page.

PLEASE NOTE: U.P.S. DOES NOT OPERATE ON THE WEEKEND, SO IF YOU ORDER A NEXT DAY AIR PART ON FRIDAY, YOU WILL NOT GET IT ON THE WEEKEND! WE CAN'T BE RESPONSIBLE FOR THE U.P.S. DELIVERY SCHEDULES. IF YOU NEED A PART FOR THE WEEKEND, PLEASE ORDER BY THURSDAY BEFORE NOON MOUNTAIN TIME. ALSO ANY NON STOCKED ITEM THAT MUST COME FROM A FACTORY MAY NOT BE ABLE TO BE SHIPPED BY ANY MEANS OTHER THAN U.P.S GROUND, DEPENDING ON THE FACTORY IT HAS TO COME FROM! IF THIS OCCURS ALL WE CAN DO IS REFUND SHIPPING CHARGES BETWEEN WHAT YOU ORDERED AND GROUND AS WE HAVE ABSOLUTELY NO CONTROL OVER THIS!

Home Hours About Us Contact Terms of Use and Privacy Policy Education Links