Hi Speed Furnace and Air Handler Motors

Due to the nature of the products we sell directly to homeowners we must have you read and understand our terms of use page. If for any reason you can't understand or agree to these terms we suggest you call a reputable Heating and Air Conditioning Contractor in your area for assistance. Your safety and the manufacturers warranty also requires it. Please click this link.
Terms of Use and Privacy Policy

SEARCH OUR SITE

AIR FLOW PROBLEMS? THIS IS THE NEXT BEST CURE TO ZONING. THESE MOTORS TURN AT 1625 R.P.M. NOT THE USUAL 1075R.P.M.

READ OUR MOTOR EDUCATION PAGE Furnace, Air Conditioning Motor Education.

Before ordering any motor or bracket be sure to check the name plate on your present motor for the following.

Please do not order a direct drive motor if your equipment uses a belt on the blower, instead see our belt drive motors.

Horsepower rating: While it is alright and probably more desirable to go another size bigger, you may need to adjust the blower speed taps to a lower speed to keep the temperature rise/drop through the furnace and air conditioning coil within manufacturers recommendations ( see the plate in your furnace ).
R.P.M. ( Revolutions Per Minute ). Keep this the same as what is called for by the furnace manufacturer ( unless the present motor has been changed and is too small ), unless you are PURPOSELY trying to achieve more air flow as with a 1,625 R.P.M. motor. Bear in mind that some manufacturers such as Lennox use 825 R.P.M. motors. Using a 1,075 or 1,625 R.P.M motor in this case, will lead to more noise and probably burning out the new motor unless you also oversize the new motor horsepower. Even doing this will probably result in more noise however from the increase in air flow.
Check the Phase and Voltage (see this link first) Furnace, Air Conditioning Motor Education.
Check the diameter of the motor and the shaft size of your present motor.
Will your present bracket fit the new motor or will you need a new bracket.
Rotation: All our motors are reversible, others may not be.

Emerson High Speed 1,625 R.P.M. Direct Drive Furnace and Air Handler Motors. (Motors attach directly to the blower wheel without the use of a belt.)

5 5/8" Diameter
Stud Mount, Belly Band Mount, or Resilient Mount with rubber end bells.
Requires a capacitor ordered separately below
Not for use in out door applications
Shaft length is 5"
Shaft diameter is 1/2"
Electrically reversible with a simple plug change

Emerson Capacitor Horsepower Voltage RPM
MFG Size
Number

1694 15 MFD 1/2 115 1625

1695 15 MFD 1/2 208/230 1625

1696 15 MFD 3/4 115 1625

1697 15 MFD 3/4 208/230 1625

P.S.C. ( Permanent Split Capacitor ) Motor
1625 R.P.M.

3 Speed
Electrically reversible rotation
1/2" shaft
5 5/8" Diameter
Belly band, stud or resilient mounting
ORDER CAPACITOR BELOW.

Need a motor bracket? Motor Brackets

High speed 1,625 R.P.M. motor

Need a Puller to get the fan blade off? See the bottom of this page.

PLEASE NOTE: U.P.S. DOES NOT OPERATE ON THE WEEKEND, SO IF YOU ORDER A NEXT DAY AIR PART ON FRIDAY, YOU WILL NOT GET IT ON THE WEEKEND! WE CAN'T BE RESPONSIBLE FOR THE U.P.S. DELIVERY SCHEDULES. IF YOU NEED A PART FOR THE WEEKEND, PLEASE ORDER BY THURSDAY BEFORE NOON MOUNTAIN TIME.

ORDER A MATCHING CAPACITOR BELOW THIS CHART

NOT FOR OUTDOOR USE!

Price:
To see YOUR PRICE, please click the Add To Cart button.
This does not obligate you to purchase the product. To return to this page, please use the back button on your browser

Our Order No.	Mfg. No.	H.P.	Volts	R.P.M./Speed
S89-112	1694	1/2	115	1625 (3)
S89-113	1695	1/2	208/230	1625 (3)
S89-114	1696	3/4	115	1625 (3)
S89-115	1697	3/4	208/230	1625 (3)

CAPACITOR FOR ALL THE MOTORS ABOVE

15 UF / 370 Volt

Order: G21-897

Price:
To see YOUR PRICE, please click the Add To Cart button.
This does not obligate you to purchase the product. To return to this page, please use the back button on your browser

PLEASE NOTE: U.P.S. DOES NOT OPERATE ON THE WEEKEND, SO IF YOU ORDER A NEXT DAY AIR PART ON FRIDAY, YOU WILL NOT GET IT ON THE WEEKEND! WE CAN'T BE RESPONSIBLE FOR THE U.P.S. DELIVERY SCHEDULES. IF YOU NEED A PART FOR THE WEEKEND, PLEASE ORDER BY THURSDAY BEFORE NOON MOUNTAIN TIME.

PITCH GAUGE & BLOWER WHEEL AND FAN PULLER:

Use the same tools the Pros use! These are NOT cheap, flimsy hardware
Pitch gage measures the correct pitch if you have to change a bent AC fan blade.
Puller works on both furnace and air handler blower wheels as well as AC fan blades.

Price:
To see YOUR PRICE, please click the Add To Cart button.
This does not obligate you to purchase the product. To return to this page, please use the back button on your browser

Order #	Description
H24-801	Puller A89000
H25-230	Heavy Duty Puller 053804-01
H24-850	Pitch Gage 050998-01

Home Hours About Us Contact Terms of Use and Privacy Policy Education Links