Furnace and Air Handler Motors

Due to the nature of the products we sell directly to homeowners we must have you read and understand our terms of use page. If for any reason you can't understand or agree to these terms we suggest you call a reputable Heating and Air Conditioning Contractor in your area for assistance. Your safety and the manufacturers warranty also requires it. Please click this link.
Terms of Use and Privacy Policy

SEARCH OUR SITE

Furnace and Air Handler Motor Ordering

Also see more motors by clicking the Motors and Accessories link in the left navigation bar or here Motors and Accessories

Furnace motor, furnace motors, poor air flow, low air flow, upstairs is hot, Poor ductwork, heat pump motor, heat pump motors, air conditioning motor, air conditioning motors, capacitor, capacitors, motor capacitor, motor capacitors, 115 volt, 120 volt, 1075 R.P.M., 1/3 H.P., 1/2 H.P., 3/4 H.P., 1625 R.P.M. motor, hi speed motor

Before ordering any motor be sure to check the name plate on your present motor for the following. Also if your existing motor uses a belt, do NOT order a direct drive motor, instead see our belt drive motors!

Horsepower rating: While it is alright and probably more desirable to go another size bigger, you may need to adjust the blower speed taps to a lower speed to keep the temperature rise/drop through the furnace and air conditioning coil within manufacturers recommendations ( see the plate in your furnace ).
R.P.M. ( Revolutions Per Minute ). Keep this the same as what you have unless you are PURPOSELY trying to achieve more air flow as with a 1,625 R.P.M. motor. Bear in mind that some manufacturers such as Lennox use 825 R.P.M. motors. Using a 1,075 or 1,625 R.P.M motor in this case, will lead to more noise and probably burning out the new motor unless you also oversize the new motor.
Check the diameter and the shaft size of your present motor.
Will your present bracket fit the new motor or will you need a new bracket.
Rotation: All our motors are reversible, others may not be.

READ OUR MOTOR EDUCATION PAGE Furnace, Air Conditioning Motor Education.
Be sure you are ordering the correct matching capacitor.

THESE FOLLOWING DIRECT DRIVE MOTORS ARE FOR USE AS BLOWER MOTORS IN FURNACES, PACKAGE UNITS AND AIR HANDLERS AND ARE NOT FOR USE IN AIR CONDITIONING CONDENSERS, NOR FOR BELT DRIVE APPLICATIONS. IF YOUR EQUIPMENT USES A BELT DO NOT ORDER ANY OF THESE MOTORS!

3-Speed Blower Motor
48 Frame Permanent Split Capacitor

Need a Puller to get the fan blade off? See the bottom of this page.

MOTOR ORDERING CHART

ORDER CORRECT CAPACITOR BELOW THIS CHART.